CYC Fiberglass Chopped Strand Mat (ECY-CSM)

E-glass Lower Weight of Fiberglass Chopped Strand Mat (CSM)

E-glass Lower Weight of Fiberglass Chopped Strand Mat (CSM) is made from E-glass lower tex chopped strands around 50mm length, bonded together by powder or emulsion binder which makes it perfectly compatible with polyester resins, unsaturated resins and epoxy resins. It is suitable for applications by hand lay-up ,mold process to make FRP (Fiberglass Reinforced Polymer) sheets and panels, vehicles, boat hulls, cooling towers, etc.

Product Characteristics:

a. High smoothness of the laminate surface

b. Good compatibility with vinylester, epoxy resins

c. Good drapability

d. Highly suitable for good surface appearance

e. Highly suitable for first layer with gel coat

Technical Parameters:

Product Parameters:

E-glass Lower Weight of Fiberglass Chopped Strand Mat (CSM) is wound onto a paper tube which has an inside diameter of 80mm. The roll outside diameter is approximately 275mm. Each roll is wrapped up in plastic film and then packed in a carton. The rolls are stacked horizontally or vertically onto pallets. All pallets are stretch wrapped and strapped to maintain stability during transport.

Storage:

E-glass Lower Weight of Fiberglass Chopped Strand Mat (CSM) should be stored in its original packaging in a dry, cool and water-proof place. The recommended conditions are at temperatures from 15°C  to 35°C and humidity between 35% and 65%. To ensure safety and avoid damage to the product, the pallets should not be stacked more than three layers high, when the pallets are stacked in 2 or 3 layer, care should be taken to correctly and smoothly move the top pallet.