Fiberglass Assembled Roving for Spray Up
CYC Fiberglass Assembled Gun Roving surface is coated with suitable silane sizing which is compatible with unsaturated polyester resin (UP resin), vinylester resins (VE resin), polyurethane resin etc. Due to its low static, excellent disperation and fast wet-out in resin matrixs properties, it is widely used in bathtub, water tanks, GRP/FRP (Fiberglass Reinforced Plastics) boat hulls, storage vessels, automobile parts and cooling towers, etc.
|
Type of Glass
|
ECR-glass, E-Glass
|
|
Filament Diameter (μm)
|
13
|
|
Linear Density (tex)
|
2400,4800
|
Product Properties:
a. Even Tension
b. No Fuzz
c. Anti-static
d. Moderate Wet-out Speed
e. High Mechanical Properteies
f. Excellent Dispersibility
g. Excellent Choppablity
h. No Spring back at the small angle
Technical Parameters:
|
Linear Density
|
Filament diameter
|
Moisture content
|
LOI
|
|
±5%
|
±1um
|
≤0.10%
|
1.05±0.15%
|
Packaging:
The spools of fiberglass roving is packed with heat shrinkage plastic film or PE stretched film and then put it into cardboard carton or onto pallet. Each fiberglass roving spool weight is around 18~20KGs and maximum is 24KG. The stadnard pallet is packed 48 spools or 64 spools.
The most ecomomy way of shipping fiberglass roving is loaded by 20'FT container which can load 20 pallets and the net weight is around 18~20MT.
|
Bobbin height (mm)
|
260
|
|
Bobbin inside diameter (mm)
|
80
|
|
Bobbin outside diameter (mm)
|
270
|
|
Bobbin weight (kg )
|
18-24
|
|
Number of layers
|
3
|
4
|
|
Number of rolls per layer
|
16
|
|
Number of rolls per pallet
|
48
|
64
|
|
Net weight per pallet (kg)
|
864-1200
|
1152-1600
|
|
Pallet length (mm)
|
1140
|
1140
|
|
Pallet width (mm)
|
1140
|
1140
|
|
Pallet height (mm)
|
955
|
1220
|
Storage:
Fiberglass roving should be stored in a dry and cool place with its original packing. Best conditions are at temperatures from 15℃ to 35℃ and humidity between 35% to 65%. To ensure safety and avoid damage to the product, the pallets should not be stacked more than 3 layers high, when the pallets are stacked in 2 or 3 layer, care should be taken to correctly and smoothly move the top pallet.
