CYC Fiberglass Direct Roving for Pultrusion
CYC Fiberglass Direct Roving for Pultrusion is coated with special reinforced silane sizing which is designed for Epoxy resin specially. It is widely used in the FRP (Fiberglass Reinforced Polymer) extrusion molding and many kinds of FRP (Fiberglass Reinforced Composites) products, such as tabernacles, gratings, poles, cable slot, rebar and so on.
|
Glass Fiber Type
|
E-CR Glass Fiber
|
|
Filament Diameter
|
17-24 μm
|
|
Linear Density
|
1100, 1200, 2200, 2400, 4400, 4800 tex
|
Product Characteristics:
a. Good mechanical properties
b. Complete & fast wet out in resins
c. No fuzz, even linear density
d. Uniform tension, good gathering
Technical Parameters:
|
Linear Density
|
Filament Diameter
|
Moisture Content
|
LOI
|
|
±5%
|
±1μm
|
≤0.10%
|
0.55±0.15%
|
Packaging:
The product can be packed on pallet in both small & big size pallet.
|
Bobbin height (mm)
|
260
|
|
Bobbin inside diameter (mm)
|
160
|
|
Bobbin outside diameter (mm)
|
270
|
|
Bobbin weight (kg )
|
15-21
|
|
Number of layers
|
3
|
4
|
|
Number of rolls per layer
|
16
|
|
Number of rolls per pallet
|
48
|
64
|
|
Net weight per pallet (kg)
|
720-1008
|
960-1344
|
|
Pallet length (mm)
|
1140
|
1140
|
|
Pallet width (mm)
|
1140
|
1140
|
|
Pallet height (mm)
|
955
|
1220
|
Storage:
CYC Fiberglass Pultrusion Roving should be stored in a dry and cool place with its original package. Best conditions are at temperatures from 15 to 35℃ and humidity between 35 to 65%. To ensure safety and avoid damage to the product, the pallets should not be stacked more than three layers high, when the pallets are stacked in 2 or 3 layer, care should be taken to correctly and smoothly move the top pallet.
